| Job Title | Professor |
|---|---|
| Name | HO CHI TING |
| Education | 紐約大學 機械所 博士 |
| Office | 綜一館七樓BGA0791 |
| Lab | BGA0613 Study Room forGraduates-2 |
- Degrees
- Journal Paper
- Conference Paper
- Project
- Technology Transfers
- Honor
- Thesis Guidance
- Volunteer Service
- Courses
| Country | School Name | Department | Degree |
|---|---|---|---|
| 台大 | 造船 | 學士 | |
| university of texas at arlington | 機械工程 | 碩士 | |
| state university of new york at buffalo | 機械工程系 | 博士 |
| Year | Paper Title |
|---|---|
| 2025 | Comprehensive Study on the Effects of Neodymium Doping Concentration on the Structural, Morphological, and Output Properties of Flexible ZnO Nanogenerators, Sensors and Materials, vol. 37, 11, pp. 11-, Nov. 2025 |
| 2025 | Design and Fabrication of a High-efficiency Light Absorber for Visible-spectrum Photodetectors, Sensors and Materials, vol. 37, 9, pp. 11-, Sep. 2025 |
| 2025 | Design a Multiplanar Metamaterial Solar Absorber Using COMSOL, Sensors and Materials, vol. 37, 9, pp. 12-, Sep. 2025 |
| 2025 | Effect of Binary Solvent System of Methyl Acetate and Chlorobenzene on Crystallization of Perovskite, Sensors and Materials, vol. 37, 7, pp. 9-, Jul. 2025 |
| 2025 | Performance Enhancement of Chlorine-doped ZnO Nanorod as Piezoelectric Nanogenerators, Sensors and Materials, pp. pp.359~368-, Feb. 2025 |
| 2025 | Design a Multiplanar Metamaterial Solar Absorber Using COMSOL, SENSORS AND MATERIALS, Jan. 2025 |
| 2025 | Comprehensive Study on the Effects of Neodymium Doping Concentration on the Structural, Morphological, and Output Properties of Flexible ZnO Nanogenerators, SENSORS AND MATERIALS, Jan. 2025 |
| 2025 | Design and Fabrication of a High-efficiency Light Absorber for Visible-spectrum Photodetectors, SENSORS AND MATERIALS, Jan. 2025 |
| 2025 | Effect of Binary Solvent System of Methyl Acetate and Chlorobenzene on Crystallization of Perovskite, SENSORS AND MATERIALS, Jan. 2025 |
| 2024 | Performance Enhancement of Chlorine-doped ZnO Nanorod as Piezoelectric Nanogenerators, Sensors and Materials, vol. 37, 1, pp. 10-, Dec. 2024 |
| 2024 | Unveiling Technology Acceptance in the Elevator Industry: An Extension of the Unified Theory of Acceptance and Use of Technology Model, Asian Journal of Social Science Studies, pp. pp.123~137-, Jul. 2024 |
| 2024 | Deciphering Elevator Purchase Decisions: A Feasibility Analysis Using the Technological Acceptance Model, Asian Journal of Social Science Studies, pp. pp.111~120-, Jul. 2024 |
| 2024 | Intelligent Status Diagnosis System for Water Circulation Device, IEEE PROCEEDINGS, pp. pp.78~80-, Apr. 2024 |
| 2022 | Application of doping graphene quantum dots and gold nanoparticles on dye-sensitized solar cells, MODERN PHYSICS LETTERS B, pp. 2141017-, Apr. 2022 |
| 2022 | Influence of molar ratio of MAI and PbI2 on synthesis of perovskite film, MODERN PHYSICS LETTERS B, pp. 2141016-, Apr. 2022 |
| 2021 | Application of doping graphene quantum dots and gold nanoparticles on dye-sensitized solar cells, Modern Physics Letters B , vol. 36, 10, pp. 2141017-1, Nov. 2021 |
| 2021 | Influence of molar ratio of MAI and PbI2 on synthesis of perovskite film , Modern Physics Letters B , vol. 36, 10, pp. 2141016-1, Oct. 2021 |
| 2021 | Graphene–TiO2 for scattering layer in photoanodes of dye-sensitized solar cell, Modern Physics Letters B , vol. 35, 29, pp. 2141005-1, Jun. 2021 |
| 2021 | Use of Sensor Technologies in Online Courses in Post-COVID-19 Era, Sensors and Materials, vol. 33, 6, pp. 2045-2062, Jun. 2021 |
| 2020 | Design of Bidirectional Security System for Intravenous Drip Infusion with Hybrid Communication, Sensors and Materials, vol. 32, 8, pp. 2709-2728, Aug. 2020 |
| 2020 | Fabrication of Integrated Device Comprising Flexible Dye-sensitized Solar Cell and Graphene-doped Supercapacitor , Sensors and Materials, vol. 32, 6, pp. 2077-2087, Jun. 2020 |
| 2013 | To fabricate Bragg grating on D-shaped optical fibre by micro-pressing method , Applied Mechanics and Materials , pp. p.472-p.476-, Nov. 2013 |
| 2013 | The effect of the different core layer on polymer asymmetric Bragg couplers , Applied Mechanics and Materials, pp. 2821-2825, Oct. 2013 |
| 2013 | Fabrication of a polymeric ridge waveguide filter using a replication process, Applied Mechanics and Materials, pp. 443-446, Sep. 2013 |
| 2012 | Using the Micro Mold Method to Fabricate Microlens on the Single-Mode Optical Fiber , Advanced Science Letters , Feb. 2012 |
| 2011 | Using micro-pressing method to fabricate Bragg grating on D-shaped optical fiber , Advanced Material Research , Aug. 2011 |
| 2010 | A device of Transducing Mechanical Force Using Metal Diffraction Grating Sensor , Journal of Optoelectronics and Advanced Materials, pp. 263-268, Apr. 2010 |
| 2009 | A Novel Means of Transducing Mechanical Force Using Metal Diffraction Grating Sensor, Journal of Optoelectronics and Advanced Materials, Dec. 2009 |
| 2009 | Fabrication of optical filter based on polymer asymmetric Bragg couplers, Optics Express, Sep. 2009 |
| 2008 | Using a micro molding process to fabricate polymeric filters, Optics Communications, Jan. 2008 |
| 2008 | Manufacturing of micro tungsten carbide, Micromech., Jan. 2008 |
| 2007 | Fabrication of high aspect ratio periodical structure on polymer waveguides using a replication process, Optics Express, Jul. 2007 |
| 2006 | Fabrication of Polymer Waveguide using a Replication Method, Applied optics, vol. 45, Nov. 2006 |
| 2006 | Fabrication of Polymer Waveguides Using an Molding Process, Optical Engineering, vol. 45, Oct. 2006 |
| 2006 | A Simple Replication Method to Fabricate Polymer Waveguide, Proceedings of SPIE, vol. 6177, Oct. 2006 |
| 2006 | A Novel Means of Transducing Mechanical Force Using Diffraction Grating Sensor, Applied Opeics, vol. 45, Sep. 2006 |
| 2006 | A Novel Fine Tunable Add/Drop Multiplexer, International Journal of Microwave and Optical Technology, vol. 1, Aug. 2006 |
| 2006 | High-resolution periodical structure on polycarbonate using holographic interferometry and electroforming process, Journal of Optoelectronics and Advanced Materials, vol. 8, Jun. 2006 |
| 2006 | Fabrication of Polymer Waveguides Using a Simple Method, Journal of the Chinese Society of Mechanical Engineer, vol. 27, Jan. 2006 |
| 2006 | Transducing Mechanical Forces Using A Polymer Optical Grating Sensor, Material Science Forum, vol. 505, Jan. 2006 |
| 2005 | In-situ reacted TiC reinforced aluminum alloy matrix, Journal of Material Processing Technology, Dec. 2005 |
| 2005 | Transducing Mechanical Forces Using a Polymer Optical Grating Sensor, Material Science Forum, Jan. 2005 |
| 2005 | Fabrication of Polymer Waveguides Using a Simple Method, CSME, Jan. 2005 |
| 2005 | Fabrication of a high-resolution periodical structure using a replication process, Optical Express, vol. 13, Jan. 2005 |
| 2002 | In-situ reacted TiN reinforced aluminum alloy matrix, Journal of Material Processing Technology, Aug. 2002 |
| 2002 | 分散式系統顯示模組之研製, 無, May. 2002 |
| Year | Paper Title |
|---|---|
| 2024 | 何智廷1、王啓騰2、李承翰2、白松桓2、呂佳柔2、林建維2, 電動式後背式攜車架優化研發設計, 中國機械工程學會, Nov. 15-16, 2024, TWN臺灣 |
| 2022 | 張志嘉、羅禾育、張琬婷、黃敬文、陳章華、何智廷, 以碳纖維增強錫–鉛之複合材料的磨耗, 中國機械工程學會第三十九屆全國學術研討會論文集, Dec. 02-03, 2022, TWN中華民國(臺灣) |
| 2020 | 曾盈禎、王馨慧、吳信億、吳隆廷、陳威誠、周哲宇、何智廷*, 自動綁枝器設計, 中國機械工程學會第三十七屆全國學術研討會, Nov. 20-21, 2020, TWN中華民國(臺灣) |
| 2020 | 陳琨湧、曾盈禎、 何智廷, 以溴化抑制碳-碳複合材料的氧化 , 中國機械工程學會第三十七屆全國學術研討會, Nov. 20-21, 2020, TWN中華民國(臺灣) |
| 2017 | Tian-Chiuan Wu; Chiung-Hsien Huang; Tung-Fu Hsueh; Chang-Ru Li; Jenn -Kai Tsai; Teen-Hang Meen; Chi-Ting Ho, Solutions with different concentration of ZnO prepared by Hydrothermal growth of pattern micrometer columns for DSSC, 2017 International Conference on Innovation, Communication and Engineering, Nov. 05-11, 2017, CHN大陸地區(大陸) |
| 2017 | Application of Gallium Doped Zinc Oxide in Dye Sensitized Solar Cells, 2017 International Conference on Applied System Innovation, May. 13-17, 2017, JPN日本 |
| 2017 | Ming Yang Shiu;Jenn Kai Tsai;Teen-HangMeen;Tian-Chiuan Wu;Chi-Ting Ho, Application of Doped Gallium Element Zinc Oxide in Dye Sensitized Solar Cells, 2017 IEEE International Conference on Applied System Innovation (IEEE ICASI 2017), May. 13-17, 2017, JPN日本 |
| 2016 | Low-cost fabrication of anti-reflection film with sub-wavelength structures, 2016 International Conference on Innovation, Communication and Engineering , Nov. 05-10, 2016, CHN大陸地區(大陸) |
| 2015 | Is situ reacted Tib2-reinforced mullite, 中國機械工程學會第32屆全國學術研討會, Dec. 11-12, 2015, TWN中華民國(臺灣) |
| 2015 | Application of Different TiO2 Nano-structures on the Photo-electrodes of Dye-sensitized Solar Cells, 2015 International Conference on Innovation, Communication and Engineering, Oct. 24-28, 2015, CHN大陸地區(大陸) |
| 2015 | Low-cost fabrication of anti-reflection film with sub-wavelength structures, 2015 International Conference on Innovation, Communication and Engineering , Oct. 24-28, 2015, CHN大陸地區(大陸) |
| 2012 | To fabricate Bragg grating on D-shaped optical fibre by micro-pressing, 2012 First International Conference on Information, Communication and Engineering, Dec. 15-20, 2012, CHN大陸地區(大陸) |
| 2012 | 製作大面積染料敏化太陽能電池, 中國機械工程學會 第29屆學術研討會, Dec. 07-08, 2012, TWN中華民國(臺灣) |
| 2012 | 以微模轉印製程製作脊樑式高分子波導布拉格光柵濾波器, 中國機械工程學會 第29屆學術研討會, Dec. 07-08, 2012, TWN中華民國(臺灣) |
| 2011 | Chih-Wei Hsu, In-Gong Wu, Yu-Ling Yu, Chi-Ting Ho, Using the micro mold method to fabricate microlens on the single-mode optical fiber, The First International Conference on Engineering and Technology Innovation 2011 , Nov. 11-15, 2011, TWN中華民國(臺灣) |
| 2010 | 以微模轉印法在單模光纖上製作微透鏡, 27th機械工程學會研討會, Dec. 05-07, 2010 |
| 2010 | 以微壓印製程在D型光纖上製作布拉格光柵, 27th機械工程學會研討會, Dec. 05-07, 2010 |
| 2010 | Using a Surface Relief D-Fiber Bragg Grating to Monitor Volatile Organic Compounds, AOM 2010, Dec. 03-04, 2010 |
| 2010 | The fabrication of the UV polymer Bragg grating on the D-shaped fiber, OPEE, May. 10-11, 2010 |
| 2009 | Application of Vertically Oriented TiO2 Nanotube Arrays on Dye Sensitized Solar Cells, CICC 6, Aug. 22-26, 2009 |
| 2009 | The fabrication of the Bragg grating on the D-shaped fiber, OECC, Jan. 20-23, 2009 |
| 2008 | Application of TiO2 micro-Pillar on the electrode of, ICC2, Jun. 29-Jul. 04, 2008 |
| 2008 | Manufacturing of microcopper using supersonic aided electrolysis process, APCMP, Jun. 29-Jul. 04, 2008 |
| 2007 | Manufacturing of micro tungsten carbide electrode using supersonic aided electrolysis process, ICAM, Nov. 26, 2007 |
| 2007 | Fabrication of high aspect ratio periodical structure on polymer waveguides using a replication process, Automation 2007, Jun. 13, 2007 |
| 2007 | Fabrication of high aspect ratio periodical structure on metal using an electroforming process, APCOM, Jan. 16, 2007 |
| 2006 | Fabrication of high aspect ratio periodical structure on metal using an electroforming process, OECC 2006, Jul. 20, 2006 |
| 2006 | A Simple Replication Method to Fabricate Polymer Waveguide, Proceedings of SPIE, Feb. 27-28, 2006 |
| 2006 | A Novel Means of Transducing Tensile Stresses, Prgress on Advanced Manufacture for Micro/Nano Technology 2005, Jan. 02-06, 2006 |
| 2005 | A simple method to fabricate polymer waveguide, 2005 International Conference on Advanced Manufacture, Nov. 28-Dec. 02, 2005 |
| 2005 | A New Novle Means of Transducing Tensile stress, Progess in Electromagnetics Research Symposium, Nov. 01-02, 2005 |
| 2005 | A New Method to Fabricate Polymer Waroguides, Progess in Electromagnetics Research Symposium, Nov. 01-02, 2005 |
| 2005 | Fabrication of Diffraction Gratings on polymer using a molding process, CLEO, Jul. 22-25, 2005 |
| 2004 | F.T. WengPolygonmicrolens Array Design and Fabrication Using Thermal Processing in Liga_Like Process, SPIE 2004, Nov. 20-24, 2004 |
| 2004 | A Simple Model for Right Triangular Microlens Array Design, ICTM 2004, Nov. 08-12, 2004 |
| 2004 | A Study of Micromachining Using Chemical Etching Process, the 2004 International Conference on Intelligent Mechatronics and Automation, Aug. 05-06, 2004 |
| 2003 | Study on Ultrasonic Aided Micro Electroforming, Leading Edge Manufacturing in 21st Century (LEM21), Aug. 09-10, 2003 |
| 2003 | Manufacturing of Micro Electrodes using Ultrasonic Aided Electrochemical Maching, DTIP 2003, Jul. 05-06, 2003 |
| 2003 | Development of the polymeric grating-waveguide for OADM components, Development of the polymeric grating-waveguide for OADM components, Aug. 05, 2002 ~ Aug. 07, 2003 |
| 2002 | Development of the polymeric grating-waveguide for OADM components, Development of the polymeric grating-waveguide for OADM components, Aug. 05-07, 2002 |
| Project Category | Year | Project Title | Job Title | Period |
|---|---|---|---|---|
| 企業產學計畫(含公營及私人企業) | 2025 | ACS-金屬光罩清洗設備智慧型控制方式之研究 | 主持人 | 2025.08 ~ 2029.07 |
| 企業產學計畫(含公營及私人企業) | 2024 | ACS-AD37電動工具電路板 | 主持人 | 2024.09 ~ 2025.02 |
| 其他單位產學計畫 | 2024 | IEEE ECICE 2024 | 主持人 | 2024.08 ~ 2024.11 |
| 政府產學計畫 | 2024 | 113學年度教育部補助大學校院產學合作培育博士級研發人才計畫「智慧產業科技研發博士學位學程」 | 主持人 | 2024.08 ~ 2025.07 |
| 政府產學計畫 | 2023 | 112年教育部補助大學校院產學合作培育博士級研發人才計畫「智慧機械與製造產學博士學位學程」 | 主持人 | 2023.08 ~ 2024.07 |
| 其他單位產學計畫 | 2023 | 2023 IEEE 歐亞物聯網、通訊與工程國際研討會 | 主持人 | 2023.06 ~ 2023.11 |
| 政府產學計畫 | 2022 | 111年教育部補助大學校院產學合作培育博士級研發人才計畫「智慧機械與製造產學博士學位學程」 | 主持人 | 2022.08 ~ 2023.07 |
| 其他單位產學計畫 | 2022 | 2022 IEEE 歐亞物聯網、通訊與工程國際研討會 | 主持人 | 2022.08 ~ 2022.11 |
| 政府產學計畫 | 2021 | 110年教育部補助大學校院產學合作培育博士級研發人才計畫「智慧機械與製造產學博士學位學程」 | 主持人 | 2021.08 ~ 2022.07 |
| 其他單位產學計畫 | 2021 | IEEE ECICE 2021 (2021 歐亞物聯網、通訊與工程國際研討會) | 主持人 | 2021.08 ~ 2021.11 |
| 政府產學計畫 | 2020 | 109年教育部補助大學校院產學合作培育博士級研發人才計畫「智慧機械與製造產學博士學位學程」 | 主持人 | 2020.08 ~ 2021.07 |
| 其他單位產學計畫 | 2020 | IEEE ECICE 2020 (2020年 歐亞物聯網、通訊與工程國際研討會) | 主持人 | 2020.08 ~ 2020.11 |
| 其他單位產學計畫 | 2018 | IEE ICAM 2018 | 主持人 | 2018.09 ~ 2018.12 |
| 教育部計畫型獎助案 | 2018 | 106學年度產學攜手合作計畫-產業精密機械專班 | 主持人 | 2018.08 ~ 2019.07 |
| 政府其他案件 | 2018 | (研發處未建檔)教育部補助辦理107學年度產學攜手合作計畫_產業精密機械專班**進修推廣部計畫** | 主持人 | 2018.08 ~ 2019.07 |
| 政府其他案件 | 2018 | 教育部補助辦理「107學年度五專產業核心技能培育計畫」 | 主持人 | 2018.08 ~ 2019.12 |
| 企業產學計畫(含公營及私人企業) | 2018 | ACS-直刀式裁布機改善試行計畫 | 主持人 | 2018.03 ~ 2018.12 |
| 政府其他案件 | 2017 | 106年度教育部「107學年度五專產業核心技能培育計畫」 | 主持人 | 2017.11 ~ 2018.07 |
| 教育部計畫型獎助案 | 2017 | 106學年度產學攜手合作計畫-機密機械產學攜手合作專班 | 主持人 | 2017.08 ~ 2018.07 |
| 政府其他案件 | 2017 | 106年度教育部補助辦理105年度產業學院計畫「機械產品設計與自動化產學學分學程」(第二年) | 主持人 | 2017.08 ~ 2018.07 |
| 政府其他案件 | 2016 | 教育部105學年度新辦產學攜手合作計畫-精密模具加工與自動化技術專班(國立西螺高級農工職業學校) | 主持人 | 2016.08 ~ 2017.07 |
| 政府其他案件 | 2016 | 教育部105學年度新辦產學攜手合作計畫-精密模具加工與自動化技術專班(國立西螺高級農工職業學校) | 主持人 | 2016.08 ~ 2017.07 |
| 政府其他案件 | 2016 | (進推部)教育部105學年度續辦產學攜手專班-產業精密機械專班 | 主持人 | 2016.08 ~ 2017.07 |
| 政府其他案件 | 2016 | 104年產業學院-產業學院契合式人才培育專班機械產品設計與自動化產學學分學程 | 主持人 | 2016.08 ~ 2017.07 |
| 政府其他案件 | 2016 | 105年度教育部 機械產品設計與自動化產學學分學程 | 主持人 | 2016.08 ~ 2017.07 |
| 政府其他案件 | 2016 | 教育部產學攜手合作計畫104學年度續辦班(機械設計系) | 主持人 | 2016.01 ~ 2016.12 |
| 政府其他案件 | 2014 | 教育部第二期技職教育再造-機械實務能力精進技優人才再造計畫（機械群） | 共同(協同)主持人 | 2014.01 ~ 2017.12 |
| 政府學術研究計畫-科技部專題研究計畫 | 2012 | 國科會101年度 【 以微機電製程製作微尺寸高分子濾波器元件 】 | 主持人 | 2012.08 ~ 2013.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2011 | 以微機電製程製造高分子布拉格光柵耦合器 | 主持人 | 2011.08 ~ 2012.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2010 | 以微模轉印複製製程在D型光纖上製作高解析度週期結構 | 主持人 | 2010.08 ~ 2011.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2009 | 以微模轉印複製製程在D型光纖上製作高解析度週期結構 | 主持人 | 2009.08 ~ 2011.07 |
| 政府其他案件 | 2008 | 97年度獎勵大學教學卓越計畫-精進整體教學成效、強化光機電領域特色 | 共同(協同)主持人 | 2008.08 ~ 2009.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2008 | 以簡單複製製程在高分子波導上製作高解析週期結構之製程 | 主持人 | 2008.08 ~ 2009.07 |
| 國科會專題計畫 | 2007 | 使用全像術干涉法和電鑄法製作高解晰度週期性結構之高分子製程 | 主持人 | 2007.08 ~ 2008.07 |
| 國科會案件 | 2006 | 高分子及金屬光柵在機械力感測器上應用 | 主持人 | 2006.08 ~ 2007.07 |
| 技術服務案 | 2004 | 荷重元改進研究 | 主持人 | 2004.05 ~ 2005.04 |
| 國科會案件 | 2004 | 荷重元改進研究 | 主持人 | 2004.05 ~ 2005.04 |
| 產學計畫案(私人企業或法人機構之案件) | 2004 | 荷重元改進研究 | 主持人 | 2004.05 ~ 2005.04 |
| 國科會案件 | 2003 | 鋼銅步環製作及熱噴塗鉬層 | 主持人 | 2003.06 ~ 2004.05 |
| 技術服務案 | 2003 | 鋼銅步環製作及熱噴塗鉬層 | 主持人 | 2003.06 ~ 2004.05 |
| 產學計畫案(私人企業或法人機構之案件) | 2003 | 鋼銅步環製作及熱噴塗鉬層 | 主持人 | 2003.06 ~ 2004.05 |
| 國科會案件 | 2002 | 應用複合非傳統加工方式進行微電極加工 | 共同(協同)主持人 | 2002.08 ~ 2003.07 |
| Year | Paper Title |
|---|---|
| 2024 | Tawan Suwankanit, Technology Acceptance: Implementing The UTAUT Model Of The Hydraulic Elevator For Customer Purchase Decisions, 2024 |
| 2024 | LIAO, CHANG-KAI, Development of A Test System for The Effects of Changing Oxygen Content on Exercise Performance and Recovery, 2024 |
| 2024 | LIAO, YI-WEN, Production Equipment of Bamboo Strip with Precisely Controlling Thickness, 2024 |
| 2023 | Inhibition of Oxidation of Carbon-Carbon Composites by Sol-Gel Coating, 2023 |
| 2023 | Innovative Modular Flexible Manufacturing System, 2023 |
| 2023 | The Integration of Dye-Sensitized Solar Cells and Supercapacitors with Single-Layer Graphene for Power Supply Component Fabrication, 2023 |
| 2021 | Electrical System Design for Hand TapeTool, 2021 |
| 2020 | Inhibition of the oxidation of carbon-carbon composites by bromination, 2020 |
| 2019 | Fatigue Properties of Aluminum Alloy Composite Reinforced by Titanium Nitride, 2019 |
| 2018 | The Heat Treatment and CAE Analysis of Cam, 2018 |
| 2018 | The Effect of Process Methods on Titanium Carbide Reinforced Aluminum Alloy Composites, 2018 |
| 2018 | Measured Shear Clamp Fixture of the Various Mobile Phone Size, 2018 |
| Xuan-Ming Lai, Using Focused Ion Beam and Micro-mold Transfer Printing Process to Fabricate Polymer Waveguide Bragg Grating Filter | |
| Jian-Hao Lin, Using Micro-Mold Transfer Printing Process to Fabricate Polymer Ridge Waveguide Grating Filter | |
| Chia-Lun Chang, Using the Micro Mold Method to Fabricate Polymeric Microlens on the Single-Mode Optical Fiber | |
| Sen-Kai Lin, Using micro-pressing method to fabricate bragg grating on D-shaped optical fiber | |
| Ao-Ting Cai, The Effect of Coating Film on The Thermal Stress of Metal Matrix Composite | |
| Hsiao-Han Yu, Carbon Fiber-reinforced Tin-lead Alloy Composites | |
| Jian-Xun Huang, An Internal Synthesis Method for Producing a Mullite-Chromium Carbide Composite | |
| Shao-Yuan Cai, An Internal Synthesis Method for Mullite-Chromium Carbide Composite in A Vacuum System | |
| Chih-Chia Chang, Wear of Carbon Fiber-Reinforced Tin-Lead Alloy Composites | |
| Bao-Lin Zheng, Design and Analysis of Cross Roller Bearing | |
| Kuan-Yu Hou, Nickel- and copper-coated carbon fibre reinforced tin-lead alloy composites | |
| Wei-Cheng Huang, In situ reacted TiB2-reinforced mullite | |
| YU-WEI CHUANG, Fabrication of Polymer Waveguides Using a Molding Process | |
| Ruei- Ching Huang, Using a micro-molding process to fabricate polymeric wavelength filters | |
| Pei-Chia Huang, Fabrication of high-resolution periodic structures on polymer bending waveguides using a replication process | |
| Shin-Jen Wu, Fabrication of high resolution periodical structure on D-shaped optical fiber by using a replication method | |
| CHENG, CHIEN-YU, Alumina-Chromium Carbide Composite Through an Internal Synthesis Method | |
| CHEN, KUN-YANG, In Situ Reacted TiB2-Reinforced Alumina | |
| Chun-Hsiang Chang, Comparing the Effect to the Shaft by Tempering on Machine, Box Tempering and Carburizing Heat Treatment. | |
| WU, BO-RUEI, Aluminum Alloy Composite Reinforced by Titanium Nitride | |
| Yu-Fu Chen, Fabrication of Gradient-Index Polymer Waveguides by Using The Micro-Molding Process with an Applying Electric Field Method | |
| Ying-Cong Wu, Using Micro-Mold Transfer Printing Process to Fabricate Polymer Ridge Waveguide Grating Filter | |
| Zen-Tar Kuo, Fabrication of high resolution periodical structure on D-shaped optical fiber by using a HPDMS replication method | |
| Shin-Han Lin, Using a micro-molding process to fabricate polymeric wavelength filters & Using H-PDMS to fabricate a grating with pattern of high aspect ratio | |
| sian-Zong Cai, Material research and analysis of strain resistance load cells | |
| Yu-Lin Hu, Fabrication Of Anti-reflective Structure On The Anodic Aluminum Oxide | |
| Shao-Wei Yu, Using The Phase Mask Method to Fabricate Long-Period Gratings on D-shaped Optical Fiber | |
| Hui-Qi Wang, Using The Micro Mold Method to Fabricate Polymeric Microlens on The D-type Optical Fiber | |
| Yu-Fan Shyu, Fabrication of high-resolution polymeric bending waveguides by using H-PDMS process | |
| Ming-Fung Shie, The effect of the asymmetric on polymer asymmetric Bragg couplers | |
| Yi-Fong Chen, Micro-electroplating process and the production of holographic interferometry grating components on the D-shaped metal film | |
| Che-Yi Liao, The Effect of The Different Core Layer on Polymer Asymmetric Bragg Couplers | |
| Huang-Jr Chen, Using Focused Ion Beam and Micro-Mold Transfer Printing Process to Fabricate Bragg Grating on D-Shaped Optical Fiber | |
| Hong-Yu Liao, Environmentally Friendly Free Power and Free Refrigerant Leakage of Refrigerant Oil Feeder | |
| Tzu-Feng Chen, The plan and design of quality management systemfor automatic production of flow-line type | |
| Yu-Kai Lin, Fabrication of polymer asymmetric Bragg coupler |
| Course Title | Class | Reference Link |
|---|---|---|
| 工程數學(一) | 四設計二乙 | https://tqas.nfu.edu.tw/course_schedule/detail/11510754 |
| 工程數學(一) | 四設計二甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11510740 |
| 半導體元件製程 | 碩設計一甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11510250 |